How to reset waste ink tank for a Canon Bubble jet I965

How to reset waste ink tank for a Canon Bubble jet I965

Solution:

Read More

How to solve error C000 on Canon Pixma MX870

How to solve error C000 on Canon Pixma MX870

Solution 1:

1. Switch off the printer
   
   


2. Disconnect the power cable
   
   


3. Open door:
   
   
   
   
   
   
   
   


4. Remove the orange protective tape (A) and remove the white polystyrene (protective equipment) (B).
   
   
   
   
   
   
   
   


5. Verify in the printer there is no protective equipment:
   
   
   1. 
      
      
      
      
   
   


6. Close the door.
   
   


7. Connect the cable and switch on.

Solution 2 :

- Check for any foreign body in the printer: piece of paper, paper clip...

- Check for any paper jams.

Solution 3:

- This error code C000 could be made by an empty cartridge: check for this.

Read More

How to Reset ink counter on Canon MP198

A. Entering into service mode

• Turn off the printer off is the printer power on. And remove the printer USB cable from your computer..


• While the printer is OFF, press and hold the Start/Stop button on the some other canon printers model press Resume/Cancel button.


• While still holding Start/Stop button or Resume/Cancel button, press and hold the POWER button.


• When the POWER LED (green light) lit, release the Start/Stop or resume/cancel button (still holding the POWER button).


• Still holding the power button,   Press the Start/Stop button or resume/cancel button TWICE then Release the POWER button. Wait until LCD printer to display 0 (zero) number


• After the display is 0, attach the printer UDB cable to your computer, its will detected new device installed (its normal), now go to resetting steps

B. Resetting Ink counter on the Printer

• Run “service_tool 1050.exe”. you can download the service tool software from this link: ServiceTool_1050.zip 

• Confirm detected USB-port numbers on USB port column.


• Click “Main button” on Clear ink counter section. Make sure there are papers in the paper feed because the printer will print after the process is complete.


• Click “platen button” on the “Clear ink counter” section. The printer will print again.


• Turn off the printer and then turn the printer on.

This work too with:  MP258, MP276, MP496, MP558, MP568, and MP648

Read More

How to reset waste ink pad on Canon Pixma MP210

Error 5b00 means the waste ink counter is full, you need to reset it.



Solution:



Step 1: Download PCM Service tool.





Step 2: Enter in service mode in order to used the re setter:

• Turn off the printer without pulling the power cords.


• Hold down Resume button and press Power button


• Keep holding down Power button and let Resume button go


• Then Press Resume button 5 times then let both buttons go


• The Alternate Blinking error is gone, the printer is in Service Mode state

Step 3:

• Extract the PCM servive tool resetter and then double click "servicetool.exe"


• Click Reload Button and you will get a new USB port.


• Load some papers in your printer and press the "Main" Button, wait until it shows "error 001" then press OK.


• Then press "EEPROM" button and the printer will print some text, after that click OK


• Then power off the printer (sometimes you have to press twice the power button to turn off) and turn on again.

Read More

How to reset waste ink pad on Canon Pixma MP520

How to reset waste ink pad on Canon Pixma MP520

Solution for error code 5B00:

1. Switch the printer OFF


2. Press buttons 1 + 2 + 3 and 4 (simultaneously using four fingers). See picture bellow


3. Keep pressing this four buttons for 10 seconds


4. Release the On/Off button (number 4) (Keeping pressing the others)


5. After a few seconds (when the printer go ON) you can release buttons 1, 2, 3

Read More

Solving error 5B00 on printers Canon Pixma IP6210D and IP6220D

You need to reset waste ink counter:



Step 1. Enter Service Mode





* Plug in power cable to electric source.

* Press and hold RESUME/CANCEL button

* Press POWER button

* Release RESUME/CANCEL button

* Press RESUME/CANCEL button twice in a row



Step 2. Reset Waste Ink Counter Operation



* Press RESUME/CANCEL button 4 times in a row

* Turn of the printer and then turn on again the printer. the Ink counter has been reseted

Read More