Tuesday, February 15, 2011

Error 0x61011beb on HP Officejet and Photosmart printers



Solution 1:

  • With the printer power on, disconnect the USB cable from the computer.

  • Remove the ink cartridges

  • Unplug the power cord. Wait for at least 1 minute. Plug the unit back in (press the power button if necessary)

  • Wait for the "Insert Cartridges" message. Reinstall the cartridges

    Close the product doors

  • If you receive a recalibration message, allow the printer to complete this task

  • Reconnect the USB cable

  • Try your print job again



Solution 2:

  • Plug it directly into the wall, rather than into a UPS.

  • Verify that the unit is switched on. Disconnect the USB/Ethernet cable from the All-in-One and also disconnect power cable from All-in-One and also from wall outlet.

  • Wait 30 seconds.

  • Plug in the power cable to All-in-One and also to wall outlet.

  • Check for the functionality.





Solution 3:

  • Unplug the power cable from printer when the printer is powered on and wait for 20 seconds.

  • Then, press and hold # and 6 while plugging in the power cord.

  • Continue holding until it displays Semi Full Reset message in the front panel of the All-in-One



 



0 comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...